PDA

View Full Version : Boost gauge


Agent Smith
25-01-2006, 13:17 00
Any one any ideas (with pics) of where to tee in on a new age?
scoobyDAZZA
25-01-2006, 15:45 22
sapre thing on inlet manifold,next to where the dump-valve pipe goes
didn't have to tee mine
Agent Smith
25-01-2006, 15:46 23
is it the same on the newage?
beachsleeper
30-01-2006, 22:05 14
Small hose on the top of the dump valve, you will need 2.5m of hose to reach.
Agent Smith
31-01-2006, 09:18 44
gauge I have is an electronic one, so not as much hose required.
beachsleeper
31-01-2006, 20:36 46
Dont forget to post a photo when done. I will show you mine if you show yours. :hysterical: :hysterical:
sirscooby
27-02-2006, 13:44 22
does anyone have a pic of where to tee in on a new age, or a pic of the location where the sensor tube attches too - this would help loads - thanks guys.
The Daddy
28-02-2006, 19:15 24
if you are stuck, come and find me and i will show you....
sirscooby
07-03-2006, 17:34 14
Hi,
found this on here, where on this diagram would you tee in for boost gauge?
also would there be a pipe coming away from the BOV on mine (o2 WRX)?
http://i11.photobucket.com/albums/a193/beachsleeper/wrx-intake-exhaust-diagram1.gif
Agent Smith
07-03-2006, 17:38 24
I teed mine into the pipe from the dump valve.

Works fine.
sirscooby
08-03-2006, 09:09 19
The only thing is I do not have a dump valve!!

Hence I am clueless as to where to tee.
Agent Smith
08-03-2006, 09:25 00
no dump valve?
sirscooby
08-03-2006, 15:30 28
I do not have the noisy dump valve that scares old ladies at the side of the road, does this mean as far as boost gauge goes I have had it?
Agent Smith
08-03-2006, 15:50 55
you still have a dump valve on your intercooler whih will still have a pipe from it.
sirscooby
09-03-2006, 09:07 02
Cheers,
sorry, me being thick, that is labelled BOV on the diagram I found! oops!