decat

[Sticks]

am decating my car tomorrow dose it make it sound any loader:party0040:

[Agent Smith]

er..........depends on what else you've had done......

[Sticks]

Just a dump valve and induction kit

[Big_dan531]

let me know how it sound after i have the same mods as you my decat pipes are in the post to me hopefully have them fitted this weekend are you doing it ur self or getting some one to do it.

[Sticks]

I am getting it done down ap motors in plymouth and it is about 265.00 pounds :action-smiley-065:

[Big_dan531]

oh right i just bout a group N rally down pipe for £100 and a magnex centre pipe for 69 quid im hopeing to do the centre pipe my self and speak nicely to scooby A if i cant do the down pipe and get him to do it for me

[Agent Smith]

do it your self bud,well easy......

[Big_dan531]

how much work is it to do the down pipe u got to take the heat sheild off right then its just un bolt it right????

[Sticks]

do it your self bud,well easy......
I would not have a first clue where to start thats why i am paying some one to do it

[Big_dan531]

gotta try and do it ur self get know the car how it runs then when u fcuk it up take it to some one to sort out i cant wiat till we get our garage built in the next couple of weeks i can play with it all night long

[SPEEDFREAK]

do it your self bud,well easy......

Well easy.....you turning chav on us Ed ? :hysterical:

[bob]

how much work is it to do the down pipe u got to take the heat sheild off right then its just un bolt it right????
Remove the heatsheild the day before if possible. and soak the turbo/downpipe bolts/studs in wd40. Give another good spray in the morning and hope they undo easily... Only other thing is unplug the LAMBDA senser and remove the sensor. Sometimes this is a tight fit if it gets hard to undo do back up and undo again keep doing this if it is hard to get out. It is a very easy job really long as the bolts undo ok...Turbo and downpipe get very hot so you can imagine what the bolts are like. Most cut the heatsheild to get it back on others lag the downpipe and do not bother replacing the heatshield.

[Big_dan531]

cheers bob i dont know what day they will arriving this week i got the week offf of work so i will soak them in wd40 tomor and also try and get the sensor out if i can.

i also got to change the downpipe on my clio as well tomor should be fun thwe car HAS DONE 150000 miles and i dont think it has ever been changed i have a feetling i might be snapping bolts off. :happy0005:

[Somerset Scooby]

how much work is it to do the down pipe u got to take the heat sheild off right then its just un bolt it right????

I did it on my old scoob, unbolting the old down pipe is the worst bit, it either comes off or it don't.
I soaked me nuts in WD40 for a week (oo eer missus) but still couldn't get them undone. In the end took it to a garage and they sheared two bolts off trying to get it undone.
Well worth doing though :biggrin:

[Agent Smith]

Well easy.....you turning chav on us Ed ? :hysterical:
no mate,just simple terms for our younger veiwers!!!.......:hysterical:

[Broxi]

i saoked them in wd40, and they still would not undo. got some freeze release for around £5 sprayed them with this, a few mins and they undone.