PDA

View Full Version : Induction Kit


steve555
27-11-2006, 14:29 16
Thought I'd take advantage off my 2 weeks of work, by doing bits on the car which i haven't had the time to do. Was up nice and early this morning, sun shining - result http://www.imprezasport.net/forums/style_emoticons/default/cool.gif Time to fit new induction kit.

http://i67.photobucket.com/albums/h310/scoobysteve555/InductionKit.jpg

I have got a new cone to go on it, just was sent the wrong adaptor to fit onto the MAF http://www.imprezasport.net/forums/style_emoticons/default/banghead.gif

Time to modify. it now pulls better and more responsive http://www.imprezasport.net/forums/style_emoticons/default/up.gif Will at some stage sort out some sort of heatshield to shield from engine heat.

All opinions welcomed.

Yes, i know it needs a clean http://www.imprezasport.net/forums/style_emoticons/default/rolleyes.gif
Steve
<!--IBF.ATTACHMENT_135386-->
Scooby2
27-11-2006, 15:31 31
Looking good, here's ours....also needs a heat sheild

http://img.photobucket.com/albums/v295/Mumza/Induction3.jpg
bob
27-11-2006, 16:12 53
Is the newage Sport run on a MAP and not MAF? Or is the MAF tucked away where I cannot see it?
steve555
27-11-2006, 16:44 03
You're right with your first thought Bob. upto and inc. MY97 they used the phase 1 engine which had MAF. After this year the Phase 2 engine was brought in, which uses MAP as seen in Scooby2's car
bob
27-11-2006, 17:01 33
Pity they never dumped the MAF idea on the turbo models...:wink:
scoobyDAZZA
27-11-2006, 17:24 47
Pity they never dumped the MAF idea on the turbo models...:wink:

innit
steve555
27-11-2006, 17:49 06
:hysterical: lol. Why didnt they ?
bob
27-11-2006, 19:04 12
Changed my MY99 ecu and done away with the MAF...never gave me probs anymore...:hysterical:
Orbs
27-11-2006, 19:07 16
as seen in Scooby2's car

WHERE!!! :redface:
bob
27-11-2006, 19:10 50
WHERE!!! :redface:

Look at Steve's induction you see a black box in line by the cone...This is the dreaded MAF....Yours do not use MAF as it used a MAP....:wink:
Orbs
27-11-2006, 19:24 52
none the wiser lol
steve555
27-11-2006, 20:11 16
You wont see it cos MAP sensor is Manifold Absolute Pressure, so the sensor will be on the Inlet Manifold itself
Big_dan531
27-11-2006, 20:34 10
hey steve just found this im looking for a heat sheild for my cone filter

http://cgi.ebay.co.uk/Quikshift-Induction-Air-Filter-Heat-Shield_W0QQitemZ180048280506QQihZ008QQcategoryZ366 80QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

looks quite easy to fit and is not a \bad price could prob make cheaper but would be hassle

danny