My new toy!!

[phill-type-r]

http://img143.imageshack.us/img143/6137/allpackagedjc5.jpg

http://img98.imageshack.us/img98/6601/isthatnormallp6.jpg

http://img143.imageshack.us/img143/6808/itsnakedzk7.jpg

http://img143.imageshack.us/img143/1148/lovingitlr6.jpg

http://img98.imageshack.us/img98/1878/shamenotoncarbj3.jpg

http://img224.imageshack.us/img224/8963/soshineyzd5.jpg

http://img143.imageshack.us/img143/4397/sho5.jpg

Hoping for about 320bhp/300lb torque when its mapped and finished :D Only concern is in the second pic with the small bit of metal sticking out of it :( Is that a problem? Gonna try and get it wrapped as well as it should help with the heat under the bonnet :D

[Agent Smith]

you got it then........you fitting it yourself Phill??

[phill-type-r]

:hysterical: You got to be kidding mate?!! :hysterical:

I wouldnt have a clue mate... Zen are doing it for me. Needs a new sensor anyways, so its getting done all at once...

[Somerset Scooby]

Quality looking piece of kit, very shiney :cool:

[Agent Smith]

is easy bud.......just remove the heat sheild from the tubby.....

undo the 5 nuts/bolts attaching it o the tubby.....

undo the 2 nut and bolt assembly on the centre of the system..

undo the bolt that secures it to the gearbox and job done....

reassemble in reverse order....

[phill-type-r]

Might be a bit different as I have a 6 speed in there... :eek:

[Agent Smith]

no mate will still be the same..........

[phill-type-r]

That's ok then :D Cant wait to get it fitted and running :D

[SCOOBY A]

you mite have to wake it up before you fit it,

looks verry sleepy and ready to be tucked into bed!!

:hysterical: :hysterical:

[phill-type-r]

I feel like that also!! :hysterical:

[bob]

Worth running a small grinder just down the inlet...There seems to be a lump of something stuck down there...:wink: Should be nice and smooth all the way down...:wink: Or you could just get Zen to do it...:hysterical:

[phill-type-r]

Bob you read my mind!!

I'm going to mention it to Derek who I assume will be doing the job anyways, so he can take a look at it...

Do you think having the heat wrap put on it Bob is a good idea?

[beachsleeper]

Bob you read my mind!!

I'm going to mention it to Derek who I assume will be doing the job anyways, so he can take a look at it...

Do you think having the heat wrap put on it Bob is a good idea?

You will find that you will have to cut heat sheilds. I lagged mine to help stop heat soak.:smile:

http://i11.photobucket.com/albums/a193/beachsleeper/e387b50e.jpg

[bob]

As you can see Graham has the right idea...:wink: Always worth lagging the downpipe...:smile:

[phill-type-r]

Thanks guys :) Is there a particular wrap you need to use etc or would any do?

[bob]

You can get this stuff at Holfords or Ebay most places do it there is also a sealer that comes with it or you can purchase it seperatly.

[phill-type-r]

I'm sure Derek will sort it out for me when I ask him about it. I have to call him up and sort it out, finalise prices etc..

[worker]

you mite have to wake it up before you fit it,

looks verry sleepy and ready to be tucked into bed!!

:hysterical: :hysterical:
what is it ? is it a bedroom buddy if it is how dose it work:biggrin: :hysterical: :hysterical: :hysterical:

[bob]

3" bore Dave much to large for you...:hysterical: :hysterical: :hysterical:

[worker]

:sad-smiley-046: i think i would be very sore:sick0019: :hysterical: :hysterical: :hysterical:

[phill-type-r]

Oh no my sports cat thread is turning into porn :hysterical:

[bob]

Oh no my sports cat thread is turning into porn :hysterical:

ahhh sports cat thought it was a sports pussy....:wink: :hysterical:

[scoobyDAZZA]

make sure you lag it like graham did
if you retain the original heat shield then you'll have to cut it , maybe scoobtastic could confirm this

if i ever got mine off again then i'd spray 4 or 5 coats of heat resistant spray then lag it , better than i did before lol , my lagging fell off and trailed behind the car :( , take yer time doing it and it should be fine

[Broxi]

Yes agree with Dazza, Spray a few coats of Ceramic heat spray, then lay, then spray over the Lagging.

I just lagged mine, and i lagged the up pipe, the lagging has held, but should have coated it. keeps the Temps down and bushes the Torqe up.

was reading about this last night.

[phill-type-r]

Thanks for the tips there guys :D I'm let Zen know and they can just bill me for it!! :hysterical: