PDA

View Full Version : RR Section



Sticks
27-12-2007, 18:25 54
This was it standard.

http://i176.photobucket.com/albums/w180/scoobysticks/Toyotastarletglanzafirstrollingroad.jpg

This after i put a few mods on and put it to 1 bar of boost.

http://i176.photobucket.com/albums/w180/scoobysticks/IMAGE0002.jpg

I will be looking at more power getting into the summer.

Sticks

xXx
27-12-2007, 21:52 33
sweet as...

Torpedo
27-12-2007, 22:06 30
nice one mate


BUT HOW MUCH MORE POWER CAN YOU GET UNDER THAT SMALL CAR LOL


; )

Sticks
27-12-2007, 22:12 29
A lot. Bloke just finished going AJ's and gone away with this

Here is what he had done:

Engine
Ross Pistons (74.5mm)
1.2mm Headgasket
Denso 330cc Injectors
THS Rods
Magnecor 8.5mm Red HT Leads
Cusco Oil Catch Can
Walbro Fuel Pump
Sard Fpr (With Gauge)
Greddy Profec B
Emanage Ultimate
Wepr TD04 Turbo Kit
Sard Thermostat (Low Temp)
Sard Rad Cap (1.3 Bar)
JR Induction Filter
JR Engine Breather Filter
Custom Exhaust
NGK Irridium Plugs
Greddy oil filter relocation kit
Modified Head
Thermotec heat wrap, Reflective barrier and reflective tape.


http://i176.photobucket.com/albums/w180/scoobysticks/rrresult.jpg

Torpedo
27-12-2007, 22:14 00
S**t go 4 it mate


; )

Sticks
27-12-2007, 22:19 39
Don't you worry i will get there :biggrin:

dj wagon wrx
28-12-2007, 00:36 52
keep going sticks
more power under your foot
:biggrin:

briharri147
28-12-2007, 02:37 55
Nice 1 Mark

Alan Jeffery
28-12-2007, 20:34 48
Plus Front Mount, Coil Overs, Wilwood Brakes, Paddle Clutch.. etc..

steve555
28-12-2007, 20:41 06
Nice one Mark, bet you're well happy

Sticks
28-12-2007, 20:43 18
Nice one Mark, bet you're well happy

Just a bit :biggrin: but want more power already :rolleyes1:

Good things to those that wait :redface: even though i am ordering stuff for a TDO4 conversion :biggrin:

Dr.Scoob
03-01-2008, 19:07 07
OMG. that is an amazing amount of power out of a small engine. I just hope that it doesn't go bang

As for yours Sticks the improvement would have looked even more impressive if the first graph had been done at AJ's too. AP's are always a little generous lol

Sticks
03-01-2008, 19:08 25
I thought that too. Damn :smile:

Alan Jeffery
03-01-2008, 22:40 01
We expect that engine to be fine. It was carefully built, using decent kit, and fully balanced. It also only runs 1.2 bar!

Sammi
04-01-2008, 11:06 30
A lot. Bloke just finished going AJ's and gone away with this

Here is what he had done:

Engine
Ross Pistons (74.5mm)
1.2mm Headgasket
Denso 330cc Injectors
THS Rods
Magnecor 8.5mm Red HT Leads
Cusco Oil Catch Can
Walbro Fuel Pump
Sard Fpr (With Gauge)
Greddy Profec B
Emanage Ultimate
Wepr TD04 Turbo Kit
Sard Thermostat (Low Temp)
Sard Rad Cap (1.3 Bar)
JR Induction Filter
JR Engine Breather Filter
Custom Exhaust
NGK Irridium Plugs
Greddy oil filter relocation kit
Modified Head
Thermotec heat wrap, Reflective barrier and reflective tape.


http://i176.photobucket.com/albums/w180/scoobysticks/rrresult.jpg
That is so heart breaking! Thats shiftys old car! and whats worse is its shightly more bhp as my scoob!!!!

http://i201.photobucket.com/albums/aa218/samjeanvoss/sammis%20wrx/scoobiedyno002.jpg

Well done mark it sounds like your having nothing but fun!!!!!! :sign0191:

AJG
04-01-2008, 15:42 42
oh my god thats mental!:character0307:do it soon sticks....

Sticks
04-01-2008, 19:16 43
That is so heart breaking! Thats shiftys old car! and whats worse is its shightly more bhp as my scoob!!!!

http://i201.photobucket.com/albums/aa218/samjeanvoss/sammis%20wrx/scoobiedyno002.jpg

Well done mark it sounds like your having nothing but fun!!!!!! :sign0191:

Lots of fun and i am going to keep going :biggrin:

Already bought the TDO4 :redface: :party0040: